API spec 16C
|
1.
Choke and Kill Manifold:
The choke and kill manifold are the necessaries to control well kick and make pressure control for oil (gas) wells. It can achieve remote control by the hydraulic control cabinet. The choke and kill manifold manufactured by our company conform to API Spec 16C and NACE Standard MR0175. We can design and made this product according to users' request.
1.1 Choke Manifold:
It is used to control casing pressure, keep wellbore pressure balance, release pressure through choke valves to realize soft closing, and blow down to protect wellhead.
1.2 Kill Manifold
It is used to pump heavy drilling fluids into the well to balance bottom hole pressure, and blow down directly to release bottom hole pressure. It is also available for injecting water to flush well and injecting extinguishing agent
Main Technical Parameters for Choke and Kill Manifold |
Rated Pressure |
2000psi ~10000psi |
Nominal Size |
2 1/ 16in ~ 4 1/ 16in |
Temperature |
PU -29 ~ 121 ¡æ |
Material Class |
DD ~ FF |
2. Mud Manifold:
Forming a complete set with the drilling rig of such types as ZJ45, ZJ45J, Daqing ¢ñ and Daqing ¢ò. 4GX-5000psi mud manifold is used to collect the drilling mud from the slush pump and transport it into the well and the mud gun place.
Main Technical Parameters for 4GX-5000psi Mud Manifold |
Rated Pressure |
5000psi |
Nominal Size |
4in |
Temperature |
PU -29 ~ 82 ¡æ |
Applicable Medium |
water, mud, fracturing fluid, crude oil. |
3. Floor Manifold:
The floor manifold is a ground control equipment for connecting both control heads and separator relief lines. It is used to control the fluid pressure and flow rate.
Main Technical Parameters for Floor Manifold |
Rated Pressure |
5000psi ~ 15000psi |
Nominal Size |
2in ~ 4in |
Temperature |
PU -29 ~ 121 ¡æ |
Applicable Medium |
crude oil, water, gas. |
|
